Summative Assessment

Reminder!

After completing your Summative Assessment, don't forget to take the Module 4 Quiz. If you didn't answer the Learning Checkpoint questions, take a few minutes to complete them now. They will help your study for the quiz, and you may even see a few of those questions on the quiz!

Climate Modeling Activity

In this activity, we’ll explore some relatively simple aspects of Earth’s climate system, through the use of several STELLA models — you’ve seen some of these in the Module 3 activity. STELLA models are simple computer models that are ideal for learning about the dynamics of systems — how systems change over time. The question of how Earth’s climate system changes over time is of huge importance to all of us, and we’ll make progress towards understanding the dynamics of this system through experimentation with these models. In a sense, you could say that we are playing with these models, and watching how they react to changes; these observations will form the basis of a growing understanding of system dynamics that will then help us understand the dynamics of Earth’s real climate system.

If you pause for just a moment and think about what we are doing in these activities, it is really just an application of the scientific method. We start with a question, develop a hypothesis, devise and carry out an experiment to test the hypothesis or answer the question, and then study the results to see if they provide an answer to our original question. So, we are learning through experimentation. In this Summative Assessment, we will work through a series of four experiments designed to test the influence of various forcings on climate.

Instructions

This assessment is broken into four experiments with questions related to each one. Separate web pages have been provided for each experiment to reduce scrolling. We have also provided the activity as a worksheet that you can download and even print if you prefer. You may find downloading or printing the complete worksheet easier to work with as you prepare your answers to submit them. As before, there is a practice version, and then a graded version — each version has its own set of model values that are provided in the worksheet.

Files to Download

Download the worksheet. Completing the 'Practice' and 'Graded' versions of the exercise, in the following pages or on the attached worksheet, is required before submitting your assignment.

Submitting Your Assessment

Work through the practice version first, then write down your answers for the graded version on the worksheet. Once you have answered all of the questions on the worksheet, go to Module 4 Summative Assessment: Graded. The questions listed in the worksheet will be repeated as an Canvas Assessment. So all you will have to do is read the question and select the answer that you have on your worksheet. You should not need much time to submit your answers, since all of the work should be done prior to launching the assessment quiz.

Grading and Rubric

This assignment is worth a total of 17 points. The grading of the questions and problems is below:

Scoring Information
Item	Possible Points
Questions 1-14	1 point each
Question 15	3 points

azs2 Tue, 02/17/2015 - 14:01

Introduction to a Simple Planetary Climate Model

Our first climate model calculates how much energy is received and emitted (given off) by our planet, and how the average temperature relates to the amount of thermal energy stored. The complete model is shown below, with three different sectors of the model highlighted in color:

Stella Diagram for Planetary Climate Model as described previously but with colors described in caption

Figure 1. A very simple STELLA model of Earth’s climate system. The three colored sectors show the parts of the model that keep track of the energy coming in to the Earth from the Sun, the energy leaving the Earth through emitted heat, and the average surface temperature of the Earth.

Click for a text description of the STELLA Diagram for the Planetary Climate Model.

This STELLA diagram visually represents the planetary climate model by categorizing key climate-related variables into three main groups: Energy In (yellow area), Temperature (red area), and Energy Out (blue area).

Energy In (Yellow Area):
- Factors affecting incoming solar energy: Solar Constant, Albedo, Surf Area.
- These variables influence Insolation, which directs energy to Earth Heat.
Temperature (Red Area):
- Includes Ocean Depth, Water Density, and Heat Capacity, which influence Temperature.
- Temperature interacts with Earth Heat and contributes to heat exchange processes.
Energy Out (Blue Area):
- Outgoing energy factors include Heat Emitted, LW Int, and LW Slope.
- Earth Heat emits energy, balancing the system.

Arrows show the flow of energy and interactions between these factors. The diagram helps illustrate the components regulating planetary climate.

Credit: David Bice @ Penn State is licensed under CC-BY-NC-4.0

First, let’s define a few terms that you might not be familiar with.

Insolation —stands for Incoming Solar Radiation, which is a fancy way of saying sunlight or solar energy.

Albedo — the fraction of light reflected from some material; 0 would be a perfectly black object (no reflected light) and 1 would be a perfectly white object (no light absorbed).

Heat capacity — this is the amount of energy (units are Joules) needed to raise 1 kilogram of some material 1°C.

Ocean Depth — this is the depth of the part of the ocean that is involved in climate over short time scales of decades, the part of the ocean exchanges energy with the atmosphere. While the whole ocean has an average depth of ~4000 m, the part we worry about here has a depth of less than 500 m.

LW Int and LW slope — these are parameters used to describe the relationship between the average planetary temperature and the amount of long-wavelength (infrared, or thermal) energy emitted by the planet; more details are provided below.

azs2 Tue, 02/17/2015 - 15:45

The Energy In Sector

Stella diagram for Planetary climate model. Same as previous page

Click for a text description of the STELLA Diagram for the Planetary Climate Model.

Energy In (Yellow Area):
- Factors affecting incoming solar energy: Solar Constant, Albedo, Surf Area.
- These variables influence Insolation, which directs energy to Earth Heat.
Temperature (Red Area):
- Includes Ocean Depth, Water Density, and Heat Capacity, which influence Temperature.
- Temperature interacts with Earth Heat and contributes to heat exchange processes.
Energy Out (Blue Area):
- Outgoing energy factors include Heat Emitted, LW Int, and LW Slope.
- Earth Heat emits energy, balancing the system.

Arrows show the flow of energy and interactions between these factors. The diagram helps illustrate the components regulating planetary climate.

David Bice @ Penn State is licensed under CC-BY-NC-4.0

The Energy In sector (yellow in Fig. 1 above) controls the amount of insolation absorbed by the planet. The Solar Constant is not really a constant, but it does tend to stay close to a value of 343 Watts/m² (think of about six 60 Watt light bulbs shining down on a patch of ground 1 meter on a side — this is what we get from the Sun). This is then multiplied by (1 – albedo) and then the surface area of the Earth giving a result in Watts (which is a measure of energy flow and is equal to Joules per second). In the form of an equation, this is:

$E_{in} = S \times A \times (1 - α)$

S is the Solar Constant (343 W/m²), A is surface area, and α is the albedo (0.3 for Earth as a whole).

This is the equation $E_{in} = S \times A \times (1 - α)$

azs2 Tue, 02/17/2015 - 15:47

The Energy Out Sector

Stella diagram for Planetary climate model. Same diagram as previous page

Click for a text description of Figure 1.

Energy In (Yellow Area):
- Factors affecting incoming solar energy: Solar Constant, Albedo, Surf Area.
- These variables influence Insolation, which directs energy to Earth Heat.
Temperature (Red Area):
- Includes Ocean Depth, Water Density, and Heat Capacity, which influence Temperature.
- Temperature interacts with Earth Heat and contributes to heat exchange processes.
Energy Out (Blue Area):
- Outgoing energy factors include Heat Emitted, LW Int, and LW Slope.
- Earth Heat emits energy, balancing the system.

Arrows show the flow of energy and interactions between these factors. The diagram helps illustrate the components regulating planetary climate.

David Bice @ Penn State is licensed under CC-BY-NC-4.0

The Energy Out sector (blue above) of the model controls the amount of energy emitted by the Earth in the form of infrared (thermal) radiation, which is a form of electromagnetic radiation with a wavelength longer than visible light, but shorter than microwaves. You saw earlier that this is often described using the Stefan-Boltzmann Law which says that the energy emitted is equal to the surface area times the emissivity times the Stefan-Boltzmann constant times the temperature raised to the fourth power:

A is the whole surface area of the Earth (units are m²), ε is the emissivity (a number between 0 and 1 with no units), σ is the Stefan-Boltzmann constant (units are W/m² per °K4), and T is the temperature of the Earth (in °K). The problem with this approach is that it ignores the greenhouse effect, which is a very important part of our climate system. We could represent the greenhouse effect by choosing the right value for the emissivity in the Stefan-Boltzman law, but here, we will use a different approach, one in which Eout is based on actual observations. With a satellite above the atmosphere, we can measure the amount of energy emitted in different places on Earth and figure out how it relates to the surface temperature. As it turns out, this is a pretty simple relationship, described by a line:

$E_{out} = (⟦ LW ⟧_{int} + ⟦ LW ⟧_{s} \times T) \times A$

The part inside the parentheses is just the equation for a line, with an intercept (LW_int with units of W/m²) and a slope (LWs with units of W/m² per °C). This new way of describing Eout is shown as the red line in the figure below:

Figure 2. Three different schemes for representing the long-wavelength energy (heat) emitted by Earth. The blue curve is the simple Stefan-Boltzman Law, which suggests that at the average temperature of the Earth (15°C), our planet would emit way more energy than we get from the Sun, and so we would cool down until the temperature reached -18°C at which point the Ein = Eout and we have a steady state. The green curve shows the Stefan-Boltzman Law modified by including a new term called emissivity (0.6147), which brings us into an energy balance (steady state) at a temperature of 15°C. The red curve instead represents this relationship based on actual measurements from satellites — notice that it too puts us at a steady state when the temperature is 15°C. The red curve is what we will use in this model.

Click for a text description of Figure 2.

This graph plots Long-wave Energy Emitted (W/m²) on the y-axis against Temperature (°C) on the x-axis to illustrate how Earth's natural greenhouse effect raises the planet’s temperature.

The blue curve represents E_out = σT⁴, showing energy emitted without an atmospheric greenhouse effect.
The green line represents E_out = 0.6147σT⁴, depicting energy emission with Earth's greenhouse effect.
The red line represents E_out = 210 + 2T, another approximation of outgoing energy.
A horizontal dashed line at 240 W/m² represents energy absorbed from the Sun (343(1 - albedo)).
The intersection of the green line with the 240 W/m² level indicates Earth's actual average surface temperature of 15°C.
Without the greenhouse effect, the temperature would be -18°C, marked on the graph.
A label notes that Earth’s greenhouse raises the temperature by 33°C.

David Bice @ Penn State is licensed under CC-BY-NC-4.0

The key thing here is that the hotter something is, the more energy it gives off, which tends to cool it, and it will continue to cool until the energy it gives off is equal to the energy it receives — this represents a negative feedback mechanism that tends to lead to a steady temperature, where $E_{in} = E_{out}$ .

azs2 Tue, 02/17/2015 - 15:50

The Temperature Sector

Stella diagram for Planetary climate model

Click for a text description of Figure 1.

Energy In (Yellow Area):
- Factors affecting incoming solar energy: Solar Constant, Albedo, Surf Area.
- These variables influence Insolation, which directs energy to Earth Heat.
Temperature (Red Area):
- Includes Ocean Depth, Water Density, and Heat Capacity, which influence Temperature.
- Temperature interacts with Earth Heat and contributes to heat exchange processes.
Energy Out (Blue Area):
- Outgoing energy factors include Heat Emitted, LW Int, and LW Slope.
- Earth Heat emits energy, balancing the system.

Arrows show the flow of energy and interactions between these factors. The diagram helps illustrate the components regulating planetary climate.

David Bice@ Penn State is licensed by CC-BY-NC-4.0

The Temperature sector (brown in Fig. 1) of the model establishes the temperature of the Earth’s surface based on the amount of thermal energy stored in the Earth’s surface. In order to figure out the temperature of something given the amount of thermal energy contained in that object, we have to divide that thermal energy by the product of the mass of the object times the heat capacity of the object. Here is how it looks in the form of an equation: (see directions for how view images in a larger format)

$T = \frac{E}{A \times d \times ρ \times C_{p}}$ or $Temperature = \frac{Energy}{area \times depth \times density \times heat capacity}$

Let’s look at it with just the units, to make sure that things cancel out:

$[^{O} K] = \frac{[J]}{[m^{2}] \times [m] \times [kg] \times [m^{- 3}] \times [J] \times [{kg}^{- 1}] \times [^{\circ} K^{- 1}]}$

This can be simplified by combining, rearranging, and canceling to give:

$[° K] = \frac{[m 3] \times [k g] \times [J] \times [° K]}{[m 3] \times [k g] \times [J]}$

Here, E is the thermal energy stored in Earth’s surface [Joules], A is the surface area of the Earth [m²], d is the depth of the oceans involved in short-term climate change [m], ρ is the density of seawater [kg/m³] and Cp is the heat capacity of water [Joules/kg°K]. We assume water to be the main material absorbing, storing, and giving off energy in the climate system since most of Earth’s surface is covered by the oceans. The terms in the denominator of the above fraction will all remain constant during the model’s run through time — they are set at the beginning of the model and can be altered from one run to the next. This means that the only reason the temperature changes is because the energy stored changes.

azs2 Tue, 02/17/2015 - 15:52

Other parts of the model

The model has a few other parts to it, including the initial temperature of the Earth, which determines how much thermal energy is stored in the earth at the beginning of the model run. It also includes some other features that allow you to change the solar input and the part of the greenhouse effect due to CO₂. We use the standard assumption (which is itself based on some physics calculations) that for each doubling of the CO₂ concentration, there is an increase of 4 W/m² in the greenhouse effect. This is often called the greenhouse forcing due to CO₂. In terms of our E _out curve shown in Figure 2 above, this shifts the red curve downwards — so less energy is emitted, and thus more is retained by the Earth. Let’s consider how this works — if we start with 200 ppm of CO₂ and increase it to 800 ppm, that represents 2 doublings (from 200 to 400 and then from 400 to 800), so we would get 8 W/m² of greenhouse forcing.

One unit of time in this model is equal to a year, but the program will actually calculate the energy flows and the temperature every 0.1 years.

Now that you have seen how the model is constructed, let’s explore it by doing some experiments. Here is the link to the model.

azs2 Tue, 02/17/2015 - 15:54

Experiment 1: Steady State

One of the most important components of this climate system is the relationship between temperature and the energy emitted by the planet (Fig. 2), which constitutes a negative feedback mechanism. Negative feedback mechanisms are like thermostats that act to control the temperature and maintain a steady state. In this experiment, we see if that expectation is met by our model.

What happens if we start out with an Earth that is not in a steady state so that E_in≠E_out? Use the slider controls at the top to set the initial conditions specified in the assessment.

Data for the Summative Assessment
Data	Practice	Graded
Albedo	0.3	0.31
CO₂Mult	1.0	1.0
Solar Mult	1.0	1.0
Initial T	20°C for #1,2, (10°C for #3)	5°C for #1,2, (25°C for #3)

Questions

What will happen? How will the temperature change over time? Think about how the E_in and E_out will compare at the beginning.
1. E_out> E_in — this will cause warming
2. E_out> E_in — this will cause cooling
3. E_out < E_in — this will cause warming
4. E_out < E_in — this will cause cooling
5. E_out = E_in — temperature will remain constant
Now, run the model and see what happens. What is the temperature at the end of the model run (to the nearest 0.1 °C)?
Ending Temperature =
Now change the initial temperature to second value as prescribed above, run the model and see what happens. Compared to the answer to #2, is the ending temperature the same (within 0.1 °C) or different (varies by more than 0.1°C)?
1. Same
2. Warmer
3. Cooler
Steady state for a system is the condition in which the system components are not changing in value over time even though time is running and things are moving through the system. What is the steady state temperature of your system?
Steady State Temperature =

Be sure to reset everything in the model before going to the next problem.

Hit the refresh button on your browser or the rest button on the model.

azs2 Tue, 02/17/2015 - 16:00

Experiment 2: A Fluctuating Sun

The Solar Constant is not really constant over any length of time. For instance, it was only 70% as bright early in Earth’s history, and it undergoes much more rapid fluctuations (and much smaller) in association with the 11-year sunspot cycle. During a sunspot cycle, the solar constant may vary by as much as 0.3 W/m². Let’s see what this would do to the temperature of the planet. The model has a small switch called the Solar Cycle Switch that we can use to turn on or off the effects of the solar cycle. Set the model up with the following parameters:

Module Parameters
-	Practice	Graded
Albedo	0.30	0.30
CO2 Mult	1.0	1.0
Solar Mult	1.0	1.0
Initial T	+15	+15
Ocean depth	100 for #5,6, (200 for #7)	150 for #5,6, (50 for #7)

Questions

Run the model and see what happens. How much does the planetary temperature change over the solar cycle (the difference between peak and trough — measure this after the third peak)?
Change in temperature in one cycle =
Notice that the temperature peaks after the Solar Input peaks. This time delay is called lag time. What is the lag time here in years?
Lag Time =
Predict how the model will change if you increase the ocean depth to the second specified depth (table above). How do you think the lag time and the magnitude of temperature will change relative to the first solar cycle model (#5,6)? In other words, make a prediction. It might help to think about what heats up faster — a pot with a little water in it, or the same pot with a lot of water in it?
1. Lag time shorter, magnitude smaller
2. Lag time shorter, magnitude greater
3. Lag time longer, magnitude smaller
4. Lag time longer, magnitude greater

Be sure to reset everything in the model before going to the next problem.

azs2 Wed, 02/18/2015 - 13:15

Experiment 3: Changing CO2

Let’s see what happens when we change the concentration of CO₂ in the atmosphere.

Data for Summative Assessment
Data	Practice	Graded
Albedo	0.3	0.30
CO₂ Mult	0.5	2.0
Solar Mult	1.0	1.0
Initial T	15°C	15°C
Ocean Depth	100	50

First, try to predict what will happen. How much warming or cooling will occur? Will the temperature level off, or rise/fall forever? Then run the model.

Questions

You’ve changed the atmospheric CO₂ concentration from its original value of 380 ppm by multiplying it by a specified value (table above). What is the resulting atmospheric CO₂ concentration in your model?
New CO₂ concentration =
What is the resulting temperature change at the end (50 yrs)? (±0.1 °C)
Change in temperature =
Notice that the temperature levels off at the end — it finds a new steady state. How long does it take to level off? Let’s find the response time, which is defined as the time required to accomplish 2/3 of the total temperature change. For example, if the temperature change was 1°C and it started at 15°, then we would find the time when the temperature reached 15.67°C — this would be the response time.

Find the response time for this case. (±.5 yrs)

Response Time =

azs2 Wed, 02/18/2015 - 13:22

Experiment 4. Causes of Climate Change

Things that can cause the climate to change are sometimes called climate forcings, and we’ve just tinkered with two of these — the Sun, and CO₂. It is generally agreed upon that on relatively short timescales like the last 1000 years, there are 4 main forcings — solar variability, volcanic eruptions (whose erupted particles and gases block sunlight), aerosols (tiny particles suspended in the air) from pollution, and greenhouse gases (CO₂ is the main one). Solar variability and volcanic eruptions are obviously natural climate forcings, while aerosols and greenhouse gases are anthropogenic, meaning they are related to human activities. The history of these forcings is shown in the figure below.

History of natural climate forcing’s from 1000 to 2000. Data from GHG, solar, aerosols, and volcanoes. Climate stays fairly linear.

Figure 3. The reconstructed record of important climate forcings over the past 1000 years (data from Crowley, 2000). Positive values lead to warming, while negative values lead to cooling. Note that although volcanoes have very strong cooling effects, these effects are very short-lived.

Click for a text description of Figure 3.

This graph displays climate forcing (W/m²) on the y-axis over the years 1000 to 2000 on the x-axis. Positive values indicate warming, while negative values indicate cooling.

The black vertical lines represent volcanic activity, which shows large negative spikes indicating strong cooling events.
The red line represents solar forcing, which remains relatively stable with slight variations.
The green line represents greenhouse gas (GHG) forcing, which shows a sharp increase after 1900, indicating significant warming influence.
The blue line represents aerosol forcing, which has a small negative effect in more recent years.

A legend in the lower right corner labels the different forcing factors:

Black = Volcanoes
Red = Solar
Green = Greenhouse gases (GHG)
Blue = Aerosols

Credit: David Bice @ Penn State is licensed by CC-NC-BY-4.0

Volcanoes, by spewing ash and sulfate particles into the atmosphere, block sunlight and thus have a cooling effect. This history is based on the human records of eruptions in recent times and ash deposits preserved in ice cores and sediment cores for older times; it is best during the historical period. Note that although the volcanoes have a strong cooling effect, the history consists of very brief events. The solar variability comes from actual measurements in recent times and further back in time, on the abundance of an isotope of Beryllium, whose production in the atmosphere is a function of solar intensity. The greenhouse gas forcing record is based on actual measurements in recent times and ice core records further in the past (the ice contains tiny bubbles that trap samples of the atmosphere from the time the snow fell). The aerosol record is based entirely on historical observations and is 0 earlier in time, before we began to burn wood and coal on a large scale.

In this experiment, we will add the history of these forcings over the last 1000 years and see how our climate system responds, comparing the model temperature with the best estimates for what the temperature actually was over that time period. Solar variability, volcanic eruptions, and aerosols all change the Ein or Insolation part of the model, while the greenhouse gas forcing change the Eout part of the model. We can turn the forcings on and off by flicking some switches, and thus get a clear sense of what each of them does and which of them is the most important at various points in time.

We can compare the model temperature history with the reconstructed temperature history for this time period, which comes from a combination of thermometer measurements in recent times and temperature proxy data for the earlier part of the history (these are data from tree rings, corals, stalactites, and ice cores, all of which provide an indirect measure of temperature).

First, open the model with the forcings built in, and study the Model Diagram to get a sense of how the forcings are applied to the model. If you run the model with all of the switches in the off position, you will see our familiar steady state model temperature of 15°C over the whole length of time. The model time goes from 0 to 998 years, but in reality, this is meant to be the year 1000 to 1998 (it ends in 1998 because the forcings are from a paper published in 2000).

Here are the parameters for the 2 versions:
Parameter	Practice	Graded
Ocean Depth	100	300

Questions

Use the switches to examine the effect of each of the 4 forcings separately (only 1 switch on at a time), and observe how well the model temperature matches the reconstructed (observed) temperature by looking at graph #1 only. Of the 4 forcings, which gives a better fit to the general (smoothed) shape of the observed temperature? (In other words, don’t pay attention to the detailed, squiggly part of the graph).
Best fit from:
1. Solar
2. Volcanoes
3. Aerosols
4. GHG (greenhouse gases) [correct answer for the practice version]
Now, find the forcing that does the best job of matching the detailed ups and downs (ignoring the longer term trends).
Best fit from:
1. Solar
2. Volcanoes [correct answer for the practice version]
3. Aerosols
4. GHG (greenhouse gases)
Now try the combinations of the forcings listed below and choose the one that gives the best fit in a numerical sense over the whole length of the model period (years 1000 to 1998).
1. All forcings on
2. Volcanoes + GHG
3. Solar + volcanoes
4. Solar + volcanoes + GHG
5. GHG + aerosols + volcanoes [correct answer for the practice version]
6. GHG + solar
7. Volcanoes + aerosols
Of all the forcings, which does the best job in terms of matching the strong increase in temperature over the last 100 years? This is the upward-pointing blade of the “hockey stick” pattern. Base your answer on a visual inspection of graph #1.
1. Solar
2. Aerosols
3. Volcanoes
4. GHG (greenhouse gases) [correct answer for the practice version]
Look back at what was said about the scientific method as a way of learning at the beginning of this activity, and then give an example of something new you’ve learned in this activity, and how experimentation played a role in your learning process.

azs2 Wed, 02/18/2015 - 13:37

Summary

Assessment Summary

As before, let’s try to recap some of the main points from this activity.

Earth’s climate system is an energy balance system in which the energy absorbed from the Sun is equal to the energy emitted (in the form of infrared radiation) by the Earth.
The simple fact that the energy emitted is directly related to the temperature provides a powerful negative feedback mechanism that drives the system to a steady state (where the energy in is equal to the energy out).
Although the system has a tendency to find a steady state, changes in the solar input, the albedo, and the greenhouse effect can change the steady state and the system takes a while to adjust and get into the new steady state.
The influence of CO₂ on Earth’s climate is a logarithmic one, meaning that for each doubling, the amount of extra heat retained in our system increases by 4 W/m² — so changing the concentration from 200 ppm to 400 ppm has more of an effect than changing it from 400 ppm to 600 ppm.
We hypothesize that over the past 1000 years, there are four main forcings that cause our climate to change — solar variability, volcanic eruptions, aerosols (or pollutants), and greenhouse gases. By applying these forcings to our simple climate model, we can see that combined, they provide a fairly good match with the observed temperature record (supporting our hypothesis). Of these forcings, the greenhouse gases are by far the most important in terms of matching the observed temperatures over the past 100 years. Thus, we conclude that the increase in CO₂ over this time period is the primary cause of the warming. None of the other forcings are capable of explaining this warming.

azs2 Wed, 02/18/2015 - 13:38